Servicing Instruction Manual LabScat 2
12112E/2 45
9.4 Replace desiccant
The following procedure describes changing the desiccant:
Unscrew the cover of the desiccant container.
Pull out the desiccant.
If the desiccant gets caught, tip the in-
strument backwards a little and then pull out
the desiccant.
Fold the new desiccant lengthwise and insert in
the desiccant container.
Screw the cover onto the desiccant container
until it does not go any further.
It may take several hours after a desic-
cant change until the humidity value has stabi-
lized.
To Next Page
Loading...
