Silca Matrix Evo - 2 WORKING PARTS - Matrix PRO

Operating Manual Matrix
Copyright Silca 20126
2 WORKING PARTS - MATRIX PRO
Fig. 7
A - clamp carriage (X-Y axes)
A1- clamp locking lever
B - left-hand tilting clamp
B1- right-hand tilting clamp
C - clamp carriage lever (X-Y axes)
D - vertical carriage lever (Z axis)
D1- lever release and motor start button
E - left-hand clamp knob
E1- right-hand clamp knob
F - cutter
G - transparent safety shield
H - clamp carriage locking knob
I - clamp tilt locking lever
J - lamp
K - calibration unit key pad
M - tracer point locking knob
M1- cutter locking knob
N - tracer point spring cam
O - carriage spring knob
P - ON/OFF switch
Q- motor ON switch
R - rollbar
S - tool box
T - tracer point
V - tracer point regulation micrometric ring
W- motor ON warning light
Z - power socket