Silca Matrix Evo - 1 Machine Description

Operating Manual Matrix
Copyright Silca 2012 5
1 MACHINE DESCRIPTION
The MATRIX key-cutting machine gives excellent technical performance of great precision.
The standard clamp on MATRIX is used to cut the following types of keys:
• keyswithatorinclineddimplecuts
• keys with laser type cuts
• laser keys with a narrow stem (Mercedes)
• Fichettypekeys(Hprole)(seenote)
• tubular keys (Matrix PRO only)
KEYS WITH DIMPLE CUTS KEYS WITH LASER TYPE CUTS
LASER KEYS WITH A
NARROW STEM (MERCEDES)
FICHET type KEYS
(Hprole)
TUBULAR KEYS
Ø min. 4 mm
Ø max.12 mm
with “M” adapter
STANDARD on vers.120V
OPTIONAL on vers.230V
with “F” adapter
STANDARD on vers.230V
OPTIONAL on vers.120V
STANDARD on Matrix PRO only