Silca Matrix Evo - Tracer Point Spring

Operating Manual Matrix
Copyright Silca 2012 17
Fig. 21
8.4 TRACER POINT SPRING
Fig. 22
The machine comes with a rapid system for enabling or
disabling the tracer point spring.
• To enable the tracer point spring function.
Turn/push the cam (N) all the way anti-clockwise.
• To disable the tracer point spring function.
Turn/push the cam (N) all the way clockwise.
Enable the tracer point spring:
- to cut dimple and tubular keys.
Disable the tracer point spring:
- for calibration operations.
- to cut keys with laser cuts and vehicle keys in
general.