Silca Matrix Evo - 4 Accessories Provided; Technical Data

Operating Manual Matrix
Copyright Silca 20128
4 ACCESSORIES PROVIDED
MATRIX comes with a series of accessories for use and maintenance (tools, hex wrenches, fuses, etc.) provided
in a special holder:
FICHET adapter “F”
D910534ZR
(STANDARD on vers.230V)
MERCEDES adapter “M”
D910533ZR
(STANDARD on vers.120V)
F1 cutter fuse 2 pcs
2,5 Amp - rapid (230V)
6,3 Amp - rapid (120V/100V)
T1 tracer point
2.5 mm hex wrench
F22 cutter Steel bar
T22 tracer point Calibration pins
fuse 1 pc
500 mA - rapid
Adhesive label
“DANGEROUS
MOBILE PARTS”
4.1 TECHNICAL DATA
Power supply: 230V-50/60Hz - 0,75 Amp. - 170 Watt
100V/120V - 50/60Hz - 2,3 Amp. - 220 Watt
Cutter motor: single phase 1 speed motor 230V - 50/60 Hz
Cutters: Super speed steel
Tool speed: 6000 rpm (for cutters in super speed steel)
Movements: on 3 axes by ball guides
Clamps: tilting with interchangeable plates
Runs: X axis: 40 mm Y axis: 50 mm Z axis: 30 mm
Dimensions: width: 310 mm (maximum lever operating space 400 mm)
depth: 400 mm height: 470 mm
Illumination: LED lamp
Mass: Kg. 24,6
Noise rating: Lp (A) = 70,5 dB (A) brass dimple keys
Lp (A) = 75,9 dB(A) brass keys with laser cuts
Lp (A) = 76,6 dB(A) steel keys with laser cuts