Silca Matrix Evo - Page 7

Operating Manual Matrix
Copyright Silca 2012 3
GRAPHICS IN THE USER’S MANUAL
Pay attention Obligation to read
the manual
Position of
clamp carriage
to the left
Position of
clamp carriage
to the right
Activation of
tracer point
spring
Deactivation
of tracer point
spring
GRAPHICS ON THE MATRIX KEY-CUTTING MACHINE
Obligatory use of
safety goggles
Cuer release
- Matrix PRO only -
Tracer point spring
ON
Tracer point spring
OFF
Adhesive labels
Mass - RPM - Fusibles
Adhesive label
“DANGEROUS MOBILE PARTS”(cap.4)
place the adhesive label
in the way illustrated.
Fig. 3 Fig. 4
Fig. 5
Tool alignment (green)
Lamp switch
Tracer point-key contact
Cutter-key contact
Blue LED for machine live
Calibration control ON
switch