21
Starting up
EN
Using the two-step presser foot lever
The presser foot can be raised and lowered with the two-step
presser foot lever.
• Lift the two-step presser foot lever (22) upwards to raise the
presser foot.
• Press the two-step presser foot lever (22) down to lower the
presser foot.
Raising or lowering the feed dog
The feed dog lever (24) can be seen on the base at the back side
of the sewing machine.
The feed dog helps to feed the fabric while sewing. However,
the feed dog is not necessary during all sewing operations. It is
lowered, for example, during button sewing, free-motion darning,
embroidering and monogramming.
NOTE
When feed dog lever is in raised position
③
, the feed dog
will arise automatically when you are sewing.
NOTE
When you finish the work that does not require a feed dog,
(e.g. button sewing, free motion darning, embroidery and
monogramming), move the feed dog lever back to the raised
position for general sewing.
Slide the feed dog lever
①
to lower the feed dog to position
②
or to raise the feed dog to position
③
.
To Next Page
Loading...
