37
Sewing basics
EN
v
Sewing corners
Stop the sewing machine when you reach a corner.
Lower the needle into the fabric by moving the needle to the low-
est position with the up/down button (3).
Lift the two-step presser foot lever (22).
Use the needle as a pivot and turn the fabric 90°.
Lower the two-step presser foot lever (22) and continue sewing.
v
Sewing thin fabrics
When sewing thin fabrics, the stitching may become misaligned
or the fabric may not be fed correctly.
Use stabiliser material
①
under the fabric and sew it together
with the fabric.
Remove excess stabiliser material when you have finished sew-
ing.
v
Sewing stretch fabrics
Baste
①
the pieces of fabric together, and then sew without
stretching the fabric.
1
1
To Next Page
Loading...
