68
GB
6. LED ring displays
The 3 LED rings17/18/19 on the buttons at the front of the device indicate different op-
erating modes or programming steps. The following table shows the respective meaning.
Please note that the LED rings can display 3 different states:
- permanently lit
- regularly flashing
- rhythmic flashing (flash 3 times - pause - flash 3 times - etc.)
LED ring displays
Meaning
17 18 19
All LED rings light up one after the other.
The device carries out a self-diagnosis after it is
switched on.
regularly flashing — The device is heating up to prepare espresso.
permanently lit — The device is ready to prepare espresso.
flashes — —
A single espresso is being prepared.
Dial4 opened: hot water production
— flashes — A double espresso is being prepared.
— — flashes Device preheats for steam production.
——
permanent-
ly lit
The device is ready for steam production.
——flashesDial4 opened: steam production
— — flashes during the descaling process
All LED rings flash twice in turn, one after
the other.
The settings menu is activated.
rhythmically flashing —
Turn the dial4 all the way to OFF.
The device must cool down (e.g. after steam pro-
duction)
when the steam function is activated: the device
has automatically switched to cooling mode.
Press the button 19 again to reactivate the
steam function.
All LED rings are permanently lit The device needs to be descaled.
All LED rings flash rhythmically
Error message for the heating element.
Contact the Service Centre.
To Next Page
Loading...
Need help?
General
