Name: SIMARINE PICO
Brand: SIMARINE
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5. Installation

Installation

5.1.1 PICO Standalone

PICO Standalone version has dimensions of 98 x 84 x 10 mm (3.85 x 3.30 x 0.39 in)

and needs NO installation cutout.

The mounting process requires drilling of 6 mounting holes and access to the rear

of the mounting surface. In case you have NO rear access, you can bond it using

supplied double sided tape.

1. Before drilling, check if there is enough space to mount your PICO.

2. Mark mounting holes using the supplied installation template.

3. Drill all holes.

Connect the connector on the back side of PICO to the splitter cable (be sure to align the pins correctly) and

fasten it by turning the safety ring clockwise.

5. Finish mounting the PICO from the back side with the supplied threaded rod and nuts. Screws, rods and

nuts MUST be fastened by hand. Excessive force may damage the threads on PICO.

Other manuals for SIMARINE PICO

Questions and Answers:

Need help?

Do you have a question about the SIMARINE PICO and is the answer not in the manual?

General