EN
8. Device configuration
51
Device configuration
8.
8.3.5 Inclinometer
List of inclinometer sensors which you have added to your PICO. By selecting a certain sensor, you can view or change its
settings, and you can delete it if you need to. By selecting “Add new” you can add a new analog sensor with voltage output.
For more information go to the Adding a new inclinometer .
8.3.6 User sensors
List of custom sensor which you have added to your PICO. By selecting a certain sensor, you can view or change its settings,
and you can delete the sensor if you need to. By selecting “Add new” you can add a custom user sensor.
For more information go to the Adding a new user sensor .
8.4
WI-FI
This menu offers all the Wi-Fi settings for your PICO.
OPERATION - When set to ON, Wi-Fi module is enabled. Otherwise, it is disabled, and no configuration data is displayed.
MODE - The PICO supports AP mode which stands for the access point and STA mode for station mode.
32
33
To Next Page
Loading...
