Need help?Do you have a question about the SIMARINE PICO and is the answer not in the manual?
General| Connectivity | Wi-Fi, Bluetooth |
|---|---|
| Power Supply | 12-24V DC |
| Water Resistance | IP67 |
| Dimensions | 83 x 76 x 10 mm |
| Flush Mount Depth | 8 mm |
| Display | LCD |
| Operating Temperature | -20°C to 70°C |
Provides an overview of the PICO Battery Monitor's features and capabilities.
Lists and describes modules compatible with the PICO system.
Details critical safety guidelines for handling batteries and electrical components.
Outlines the product's compliance with EU directives and standards.
Advises on optimal placement for PICO display unit for readability.
Step-by-step guide for mounting the PICO Standalone version.
Step-by-step guide for mounting the PICO Panel-mount version.
Instructions for selecting and connecting the SICOM data cable.
Guidance on wiring shunts for 12V, 24V, and higher voltage systems.
Explains how voltmeters are listed and how to view readings.
Explains how ohmmeters are listed and how to view readings.
Details the interface elements and button functions in the settings menu.
Describes the screen shown after first connection and how to access settings.
Guide on setting up battery parameters like name, type, and capacity.
Details advanced parameters for battery monitoring and customization.
Guide on setting up tank parameters like name, type, and sensors.
Guide on setting up temperature sensors, including type, range, and calibration.
Guide on setting up inclinometers, including analog and digital types.
Guide on setting up custom user sensors with specific parameters.
Details on setting up current sensors (shunts) and their parameters.
Explains data displayed on the batteries screen and SOC calculation.
Describes how tank levels are displayed, including graphical and numerical data.
Explains how current temperatures are displayed and potential issues.
Details the barograph display for air pressure trends and sea level pressure.
Explains how pitch and roll angles are displayed on the inclinometer screen.
Describes the display of custom user sensor data.
Explains how alarms are displayed and controlled on the PICO.
Configuration options for screen brightness and auto-brightness.
Configuration for auto sleep, sleep screen, and battery display.
Options for selecting the display language for the PICO.
Options for selecting measurement units for various parameters.
How to set up low/high value alarms, silence, and output modes.
Overview of managing primary and secondary devices connected to PICO.
How to view, change settings, or delete batteries in the PICO system.
How to view, change settings, or delete tanks in the PICO system.
How to view, change settings, or delete temperature sensors.
How to view and reset the Coulomb counter for current sensors.
How to view, change settings, or delete inclinometers.
How to view, change settings, or delete custom user sensors.
Configuration options for Wi-Fi operation and mode.
Details on setting up PICO as a Wi-Fi access point.
Details on connecting PICO to a local router in station mode.
How to set and synchronize date, time, and time zone.
Displays serial number, firmware version, and memory status.
Options for locking settings, changing the main screen, and system reset.
Guide on controlling PICO, monitoring data, and upgrading firmware via the app.
Instructions on how to save and restore PICO configurations using the mobile app.
Steps for updating PICO firmware via the Simarine mobile application.
Procedure for upgrading firmware in emergency situations or if standard fails.
Detailed specifications for operating, power consumption, and display capabilities.
Technical details on Wi-Fi frequency, and monitoring capacities for various sensors.
To Next Page
