EN
6. Basic Setup
22
Basic Setup
6.
6. Basic Setup
PICO’s menu management is transparent and easy to use. All changes can be done using four touch buttons below the
screen. Menus and settings can differ from your device since future firmware upgrades might cause some minor changes in
the menus and settings.
6.1
Voltmeters
List of all voltmeter sensors connected to your PICO. Connected voltmeters are added to the list automatically.
In this list, you can view real time readings (voltages) for all connected voltmeters.
6.2
Ohmeters
List of all ohmmeters connected to PICO. Connected ohmmeters are added to the list automatically. You cannot manually
add a new ohmmeter. In this list, you can view current readings (resistance in ohms) for all connected ohmmeters.
To Next Page
Loading...
