Name: SIMARINE PICO
Brand: SIMARINE
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8. Device configuration

Device configuration

8.4.1 AP Mode

When in AP mode, the PICO creates its wireless network. If you want to connect to PICO with your smartphone, please

connect to the network whose name corresponds to SSID setting value. Wireless network password can be changed with

PASSWORD setting.

Example: if your PICO’s serial number is 12345678, then the default Wi-Fi SSID is pico5678 and the password is

pico1234.

SSID - SSID stands for Service Set Identifier. In AP Mode, it is the Wi-Fi network name that is created by PICO.

TCP IP - Shows the default IP of your PICO.

TCP PORT - Shows the default TCP port for communicating with the PICO.

UDP IP - Shows the default IP to which UDP live data packets are sent.

UDP PORT - Shows the default UDP port for communicating with your PICO.

PASSWORD - Default password: pico<first four digits of the serial number>

WIFI RESET - This option restarts the WIFI settings for your PICO.

Other manuals for SIMARINE PICO

Questions and Answers:

Need help?

Do you have a question about the SIMARINE PICO and is the answer not in the manual?

General