Simphoenix DL100 Series - Inverter Installation; Environmental requirements

DL100 Series Universal Low-Power Inverter
Inverter Installation
5
Chapter2 Inverter Installation
2.1 Environmental requirements
This series of inverters are wall-mounted products and shall be vertically
installed to facilitate air circulation and heat dissipation. Following attentions
shall be paid for selecting installation environments.
1. The ambient temperature shall be within -10℃－45℃.
High-temperature and humid places shall be avoided, and the
inverter shall be better placed in a place with humidity lower
than 90% and without frosting.
2. Direct sunshine should be avoided.
3. The inverter should be away from flammable, explosive and
corrosive gas and liquid.
4. The environment should be free of dust, floating fibers and
metal particles.
5. The installation surface should be solid without ventilation.
6. The inverter should be away from electromagnetic
interference sources.
7. If there is too much dust in the environment, please close the
cooling hole.(As show in figure 2-1-A)
Closed position of heat dissipation hole
Figure 2-1-A