Simphoenix DL100 Series - Panel operating method

DL100 Series Universal Low-Power Inverter
16 Operating Panel
4.2 Panel operating method
(1) Status parameter inquiry (example)
Panel potentiometer. When the inverter’s running frequency is set by the
potentiometer on the operating meter (F0.00=3), rotate the potentiometer
knob counterclockwise to decrease running frequency, and rotate it
clockwise to increase running frequency.
Return
Normal status monitoring mode
Display :45.0 Output frequency
Status parameter inquiry
Disply:d0-00 Monitoring code
Status parameter inquiry
Disply:d0-02 Function code
Parameter inquiry
Display:383 Output voltage
Enter parameter
modification mode
(see next section)
Parameter modification mode
Display:F0.00 function code
Determine
inquiry status
parameter
Select inquired
status parameter
Back to normal control