Simplex InfoAlarm 4100U User Manual

2-9
Resetting the System, continued
Resetting a System
with Active Alarms
Activated devices (i.e, devices in alarm) can be reset, using the SYSTEM RESET key. Doing this
allows the system to return to a normal state following alarm activation. Follow these steps to
perform a system reset when alarms are present.
1. Press the SYSTEM RESET key. The following message appears.
Figure 2-11. System Reset Information Box
2. One of the following occurs, depending on whether the activated devices reset or not.
• If all zones or devices in alarm reset, the SYSTEM ALARM LED flashes. Press the
ALARM ACK key, and the following message appears:
Figure 2-12. Normal Operation Text Screen
Continued on next page.
firealarmresources.com

Simplex InfoAlarm 4100U Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
User Interface	Keypad and LCD
Type	Addressable Fire Alarm Control Panel
Operating Voltage	24 VDC
Communication	Ethernet (optional)
Compatibility	Simplex devices
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing