3-1
Chapter 3
Trouble Conditions
Introduction
A trouble condition indicates that a circuit or system function is in an abnormal condition. Trouble con-
ditions are not fire conditions; however, they must be addressed by a capable service technician. Fail-
ure to correct trouble conditions may compromise the detection and report of an emergency condition.
This chapter describes using the operator interface panel keys to investigate the details of the
trouble condition.
In this Chapter
Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Overview 3-2
Acknowledging Troubles 3-3
If the Trouble Doesn’t Clear 3-5
Trouble Conditions 3-6
To Next Page
Loading...
