Chapter 8-10 CR44/54 Waypoint / route menu
Turning “Line” OFF will make the line drawing invisible on the
screen. Put it back on the screen by turning it ON again.
Place the cursor on the function you wish to change i.e. name, line
type or color
+/-
Toggle between available values
ENT
Confirm entry
8.4.1 Delete lines via menu
MENU
Call up the menu bar, and...
6,4
load line list
+/-
Select the line you wish to delete
ENT
Open for editing
WIN
Delete line
CLR
Confirm that you want to delete the selected line, if not sure: press
[MENU] to exit the display without having made any changes.
Edit lines directly on the chart via info windows, refer to section
4.4.4 and 4.4.5.
To Next Page
Loading...
Need help?
General
