2.5 Trip Log
Aresettable Trip Log is available by pressing the LOWER
INFO key twice. The Trip Log shows the distance travelled
since it was last reset (Fig 2.6) -
IS12 Combi
12
E04052
NOTE The water temperature can be displayed in Centigrade or
Fahrenheit, as selected in the Units calibration menu (see
Section 3.1).
LIGHT
ALARM
TIMER
UPPER
INFO
LOWER
INFO
MPH KNM HKts
TRIP
Fig 2.6 - Trip Log Display
LIGHT
ALARM
TIMER
UPPER
INFO
LOWER
INFO
To reset the Trip Log back to zero, press the ALARM TIMER
key.
NOTE The Trip Log can only be reset while the Trip Log is being
displayed, and is automatically reset when the instrument is
switched off.
NOTE The Log and Trip can be displayed in Nautical Miles or
Kilometres, as selected in the Units calibration menu (see
Section 3.1).
2.6 Water Temperature
The water temperature (Fig 2.7) can be displayed by pressing
the LOWER INFO key again while in the Trip Log display (or
pressing LOWER INFO three times from the default display).
Fig 2.7 - Water Temperature Display
To Next Page
Loading...
Need help?
General
