Simrad IS12 User Manual

IS12 Combi
18
E04052
K M H
KTS
K MPH
Fig 3.2 - Selecting Speed Units
3.1 Selecting Units
Enter calibration mode and press (LOWER INFO). The
depth units can then be selected (Metres, Feet) by pressing the
or keys.
Press to set the selected depth units.
The speed units can then be selected (Knots, Kmh, mph) using
the or keys (Fig 3.2) -
Press to set the selected speed units.
The distance units can then be selected (Nm, Km). Again, use
the and keys to select, then press to set.
The top digits will then show the Temperature units
(Centigrade or Fahrenheit). Use the and keys to select,
then press to set. The unit will then return to the main cali-
bration menu.
NOTE Press to exit to the main calibration menu at any point.
LIGHT
LOWER
INFO
ALARM
TIMER
UPPER
INFO
or
LIGHT
LOWER
INFO
ALARM
TIMER
UPPER
INFO
or
LIGHT
LOWER
INFO
ALARM
TIMER
UPPER
INFO

Simrad IS12 Specifications

General

Brand	Simrad
Model	IS12
Category	Marine Equipment
Language	English