Instruction Manual
19
E04052
3.2 Damping
The Damping function adjusts the update rate of the display. A
damping level of 0 (minimum) will cause the display to update
rapidly, while a damping level of 4 (maximum) will result in a
more stable display, but one that is less frequently updated.
Enter calibration mode, press once (the display will show
CAL DPG) and press (LOWER INFO).
The damping level can be adjusted using the or keys (Fig
3.3) -
To set the selected damping level, press . The display will
then return to the main calibration menu.
NOTE Press to exit to the main calibration menu at any point.
Fig 3.3 - Adjusting Damping
LIGHT
LOWER
INFO
ALARM
TIMER
UPPER
INFO
or
COMBI
To Next Page
Loading...
Need help?
General
