Instruction Manual
27
E04052
3.6 Setting Countdown Time
Although the countdown timer is set at 6 minutes, which is the
recognised countdown time as specified in the CHS2000 racing
regulations, this can be changed to any value (in 1 min incre-
ments) between 1 minute and 9min 59secs (max).
Enter calibration mode, press x 5 (the display will show CAL
C’DN) and press (LOWER INFO).
The countdown time can be adjusted using the and keys
(Fig 3.13) -
To set the selected countdown, press . The display will then
return to the main calibration menu.
NOTE Press to exit to the main calibration menu at any point.
Fig 3.13 - Changing the Countdown Start Time
LIGHT
LOWER
INFO
UPPER
INFO
COMBI
ALARM
TIMER
To Next Page
Loading...
Need help?
General
