28 |
Settings | Simrad IS35 User manual
Alarms setting status
When an alarm option is highlighted, the Enabled
dialog at the bottom of the page will show the alarm
settings status and alarm limit.
Note: The relevant sensor must be on the network for
the alarm to be enabled.
Check box Description
Alarm disabled
Alarm enabled
Alarm group (multiple alarms). At least
one but not all alarms in the group are
enabled
There is a sub menu with other alarm
groups. Select the next level down in the
menu to show the alarm status
Alarm limits
Some alarms may feature an adjustable limit. Select
the alarm and set the limit in the Alarm Settings menu.
To Next Page
Loading...
Need help?
General
