32 |
Settings | Simrad IS35 User manual
Damping
Damping rate a ects how frequently the data is
updated; the greater the damping value, the smoother
the number change will be, but the change will also
be slower..
System
From the System menu there are several display and
system options available.
Network
Before the system can be used, the data sources need
to be con gured.
Sources
A data source can be a sensor or a device connected to
the network that provide information and commands
to other networked devices. The data sources are
normally con gured the rst time the system is turned
on. It should only be necessary to update this data if