8 |
Simrad IS35 Color Display | Simrad IS35 User manual
Default display pages
When starting for the rst time, the gauge is set
with ve default pages showing engine and system
information. It is possible to add pages via the Pages
menu and to change the template pages via the
template page sub menu.
The information displayed on xed data pages cannot
be edited by the user. The type of information shown
depends on what devices are connected on the
network.
Note: Data elds are prioritized automatically. Adding
or removing devices from the network may change
which data types are displayed on the gauge.
See the Pages section of this manual for more
information on page setup and con guration.
Page transition
Use the UP/DOWN keys to scroll through the active
pages.
To Next Page
Loading...
