42 |
Settings | Simrad IS35 User manual
Software
About
Shows the device information and current software
version installed on the gauge. Press the MENU key to
exit.
To show the current version of software on a remote
device go to the Device List and select the relevant
device.
Remote device software upgrade
Update the software for NMEA 2000 sensors.
1. Verify software version via the Device List
2. Save the update le to a USB mass storage device
3. Connect portable storage device to micro USB slot
4. Select the update le from the USB memory
5. When the details dialog appears, press ENTER
6. Press ENTER again to con rm upgrade
To Next Page
Loading...
Need help?
General
