Name: Simrad NSS evo3
Brand: Simrad
Rating: 5 (1 reviews)

To Next Page

To Previous Page

NMEA 0183 over Ethernet

NMEA 0183 data stream is also output over ethernet, which is made available to tablet

devices and PCs, via the internal wireless. The ethernet dialogue provides IP and port data

typically required for configuring the application on the third party device.

Note: Other MFDs cannot decode this information back to NMEA 0183, to use the data

as a source. To share data a physical NMEA 2000 or NMEA 0183 connection is still

required.

NMEA 2000 setup

Receive waypoint

Select this option to allow another device capable of creating and exporting waypoints via

NMEA 2000 to transfer directly to this unit.

Send waypoint

Select this option to allow this unit to send waypoints to another device via NMEA 2000.

Ethernet setup

No special setup is required for establishing an ethernet network, it is all plug-and-play. An

optional ethernet expansion device connected between the unit and another network

Software Setup | NSS evo3 Installation Manual

Other manuals for Simrad NSS evo3

Questions and Answers:

Need help?

Do you have a question about the Simrad NSS evo3 and is the answer not in the manual?

General