Instruction Manual
21
E04819 Issue 1.0
3 MENU MODE
Menu mode is used to adjust the various settings of the radio,
such as channels inhibited from scan, MMSI number program-
ming, and User channel selection.
To enter Menu mode, press S
HIFT followed by 9 (MENU).
Use the the V
OL ▲ and VOL ▼ keys to scroll through the various
menu options:
• Scanning (section 3.1)
Options related to the various scanning functions such as
channel inhibit, Memory Scan select, and scan dwell time.
• Numbers (section 3.2)
Entering of ID numbers such as MMSI, Group MMSI, and
ATIS number (if applicable in country of use).
• VHF Items (section 3.3)
Miscellaneous options such as selection of User channel,
last used channel, Interrupt Intercom, and speaker settings.
To select an option, press O
K. To return to normal radio opera-
tion, press O
N/C.
Note Entering Menu mode will inhibit the operation of the radio. Exit
Menu mode before returning the handset/fistmike to the cradle
to permit normal operation.
3.1 Scanning
Once the Scanning menu option has been selected (see intro-
duction to section 3), use the VOL ▲ and VOL ▼ keys to scroll
through the menu options:
• All Scan inhibit (section 3.1.1)
• All Scan reset (section 3.1.2)
• All Scan show (section 3.1.3)
• Memory Scan select (section 3.1.4)
• Memory Scan clear (section 3.1.5)
• Memory Scan show (section 3.1.6)
• Scan dwell time (section 3.1.7)
To select an option, press O
K
. To return to the main menu, press
ON/C.
3.1.1 All Scan inhibit
If the radio is constantly locking onto a busy channel when scan-
ning, this channel can be inhibited from the scan cycle.
To Next Page
Loading...
Need help?
General