RS86/RS87 VHF
30
E04819 Issue 1.0
3.3.4 Interrupt Intercom
This function is used to specify whether intercom or loudhailer
functions should be interrupted when a VHF transmission is
received – the default setting is “Y” (Yes).
From the VHF Items menu (section 3.2) select “INTERRUPT
INTERCOM” and press O
K – the display will show “INTER-
RUPT INTERCOM” and the current status, “Y” or “N”.
Use O
K to toggle between interrupt settings.
Use the V
OL ▲ / VOL ▼ keys to select another VHF Items menu
option, or press O
N/C to return to the main menu.
3.3.5 Auxiliary audio
The auxiliary audio input allows an external audio source to be
connected to the radio and outputted through the speaker/inter-
com system (e.g. an FM receiver for weather forecasts).
From the VHF Items menu (section 3.2) select “AUXILIARY
AUDIO” and press O
K to enter the auxiliary audio sub-menu.
Use the V
OL ▲ / VOL ▼ keys to select the required auxiliary
audio settings option:
• Use Aux AF
• Interrupt Aux AF
To turn the auxiliary audio input on, select “USE AUX AF” –
the display will show “USE AUX AF” and the current status
(“NO” or “YES”). Press O
K to toggle between the “ON” and
“OFF” settings. If “USE AUX AF” is switched on, the external
audio source will be outputted through all speakers in the sys-
tem at the set volume level.
Note When this option is turned on, the display will show “USING
AUX AUDIO” on the bottom line of the display. If the volume or
squelch is adjusted, the settings will be shown while they are
being adjusted, then revert to this display.
To specify whether the auxiliary audio input should be inter-
rupted when a VHF transmission is received, select “INTER-
RUPT AUX AF” using the V
OL ▲ or VOL ▼ key – the default
setting is “YES”. Use O
K to toggle between interrupt settings.
Use the VOL ▲ / VOL ▼ keys to select another auxiliary audio
sub-menu option, or press O
N/C to return to the VHF Items
menu. Press O
N/C again to return to the main menu.
To Next Page
Loading...
Need help?
General