Simrad RS87 User Manual

RS86/RS87 VHF
24
E04819 Issue 1.0
From the Scanning menu (section 3.1) select “MEMORY SCAN
CLEAR” and press O
K – the display will show “CHANNELS
CLEARED” (Fig 3.4).
CHANNELSSS
CLEAREDBBB
Fig 3.4 - All inhibited channels reset
Press the VOL ▲ or VOL ▼ key to select another Scanning
menu option, or O
N/C to return to the main menu.
3.1.6 Memory Scan show
This function displays all channels selected for Memory Scan.
From the Scanning menu (section 3.1) select “MEMORY SCAN
SHOW” and press O
K. The display will change to “SHOWING
CHANNELS” and display all the channels selected for Memo-
ry Scan in sequence.
Press the V
OL ▲ or VOL ▼ key to select another Scanning menu
option, or press O
N/C to return to the main menu.
3.1.7 Scan dwell time
This function is used to select the amount of time the RS86/
RS87 remains on a channel after it has locked onto it during
scanning (All Scan or Memory Scan) and the signal is lost.
From the Scanning menu (section 3.1) select “SCAN DWELL
TIME” and press O
K. The display will show “SCAN DWELL
TIME XX”, where “XX” is the current dwell time in seconds
(Fig 3.5).
Fig 3.5 - Scan dwell time
SCAN DWELL
T I ME 04
The default time is 0, meaning that the scan will continue as
soon as the signal is lost. There are 11 levels from 0–10 sec-
onds – use the numeric keys to enter the scan dwell time and
press O
K
, the display will show “DWELL TIME XX
SECONDS”.
Press the V
OL ▲ or VOL ▼ key to select another Scanning menu
option, or O
N/C to return to the main menu.

Simrad RS87 Specifications

General

Brand	Simrad
Model	RS87
Category	Receiver
Language	English