RS86/RS87 VHF
36
E04819 Issue 1.0
The display will show “SELECTED” and the entered system
number for two seconds, then exit to the SimNet Management
menu.
3.3.8 Lighting modes
This option is used to select how the backlighting is controlled
on the RS86/RS87. Backlighting control can either be limited
to the individual station, to the whole RS80 system, or across
the SimNet bus (Fig 3.16).
From the VHF Items menu select “LIGHTING MODES” and
press O
K.
Use the V
OL ▲ and VOL ▼ keys to scroll through the options:
Station All stations are independent.
Radio All stations will respond to a common level.
Network All stations respond to the network level (for
the specified lighting bank).
Press OK to set the selected lighting mode. The display will
show the lighting mode selected, then exit to the VHF Items
menu.
Note This option is station specific. It will be necessary to duplicate
these settings to any other RS80 stations for them all to behave
in the same manner.
STATION
RADIO
NETWORK
Fig 3.16 - Lighting modes
To Next Page
Loading...
Need help?
General