Simrad RS87 - Group Call

RS86/RS87 VHF
46
E04819 Issue 1.0
Press OK again to automatically switch to the working channel.
4.3.5 Group call
If the radio has a Group MMSI number entered (see section
3.2.3) and a group call is received, the radio will sound an in-
coming call alarm.
The display will flash between displaying “ROUTINE GROUP
CALL”, the caller’s MMSI, and the specified working channel
(Fig 4.14). If the caller’s MMSI is stored in the MMSI directory
(see section 5.2), the display will show the name stored instead
of the MMSI number.
06
ROUT I NESS
GROUP CALL
INT
FROMPRAY 0
3895623970
Fig 4.14 - Incoming group call
Fig 4.15 - Working channel specified by incoming group call
Press OK to accept the call – the display will change to “REPLY
ON CH X” (Fig 4.15), where “X” is the specified working
channel, or press ON/C to reject the call.
06
REPLY ONAA
CH 1 0BBBBB
INT