Instruction Manual
31
E04819 Issue 1.0
3.3.6 Speaker settings
The speaker settings option is used to set the individual default
volume levels for each station, intercom, and loudhailer in the
system.
From the VHF Items menu (section 3.2) select “SPEAKER
SETTINGS” and press O
K to enter the sub-menu. Press the
V
OL ▲ or VOL ▼ key to scroll through each speaker, displaying
the default volume level for each one.
Note Only connected speakers will be shown.
The first option in the sub-menu is “RESET TO DEFAULTS”
(Fig 3.10) – pressing O
K when this option is displayed will reset
all speaker levels to their default settings – the display will show
“RESETTING LEVELS”.
To set the required volume levels for each individual position,
use the V
OL ▲ / VOL ▼ keys to select the required station and
press O
K. The selected speaker will then emit a continuous tone
indicating the current volume level. Use VOL ▲ and VOL ▼ (ro-
tate the V
OLUME control) to adjust the volume level as required
and press O
K
to confirm.
Use the V
OL ▲ / VOL ▼ keys to select another station and re-
peat the above procedure, or press O
N/C to return to the VHF
Items menu. Press ON/C again to return to the main menu.
16
RESET TO000
DEFAULTS00
INT
Fig 3.10 - Resetting speaker settings to defaults
To Next Page
Loading...
Need help?
General