Singer QUANTUM L-500 - Free Motion Darning, Embroidery and Monogramming

70
Note: Free motion darning is accomplished
with the feed dog in the lowered position.
Movement of the fabric is controlled by the
operator; therefore it is necessary to coor-
dinate sewing speed and the movement of
fabric.
Remove the presser foot holder, and attach the
darning foot to the presser foot holder bar. The
pin (a) should be on the needle clamp screw (b).
Press the darning foot on firmly from behind with
your index finger and tighten the screw (c).
Move the drop feed lever to " " to lower the
feed dogs.
Darning
Place a piece of stabilizer under the fabric to be
mended.
First sew around the edges of the hole (to
secure the threads). Working from front to back,
sew over the hole in a constant and continuous
movement. Turn the fabric 1/4 turn and sew over
the first stitching moving the work slower over
the hole to separate the threads and not form
big gaps between the threads.
b
a
b
a
a
b
3.5~5.0
b
c
a
RX
Free motion darning, embroidery and monogramming
STITCHES
QUILTING
Note: The Darning/embroidery foot is an
optional accessory, not included.