Use the edge/quilting guide to sew parallel
stitches that are equally spaced.
Insert the bar of the edge/quilting guide into the
slot at the rear of the presser foot holder as
illustrated.
Adjust the bar of the edge/quilting guide to the
width from the needle that you desire.
Sew the first row of stitching then move the fabric
over placing the bar over the previous line of
stitching.
Continue to sew each consecutive row in this
manner for equal distance between rows.
Note: When using the straight stitch foot "RF",
only use center needle position stitches (4.5
width setting) to prevent machine damage.
4.0
1.0~3.0
RF
ATTACHING THE EDGE/ QUILTING GUIDE
72
STITCHES
Note: The Quilting foot is an optional
accessory, not included.
To Next Page
Loading...
