2. Pivot the needle threader into the threading
position so the hook pin passes through the
needle eye.
3. Pass the thread in front of the needle to catch
the hook of the threader.
4. Hold the thread loosely and return the threader
to its original position. The hook will turn and
pull the thread through the needle eye forming
a loop.
Pull the loop of thread through the needle eye.
3
Raise the needle to its highest position and
lower the presser foot.
1. Lower the needle threader lever slowly and
draw the thread through the thread guide as
illustrated and then to the right.
Attention: Turn power switch to the OFF
position ("O").
1
4
Using the needle threader
30
2
GETTING READY
UPPER THREADING
To Next Page
Loading...
