Singer SE9150 - Needle Area Overview; Right Side; Top of Machine

2 3
4
5 6
9 8
7
1
1
2
3
4
5
6
8
7
1
2
3
4
2 – Introduction
Needle Area Overview
Top of Machine
Right Side
1. Buttonhole Lever — Used for buttonhole sewing.
2. Built-in Needle Threader — Thread the needle quickly
and easily.
3. Needle Bar With Needle Clamp Screw — Secures the
needle.
4. Needle Thread Guide — Helps maintain thread ow
when sewing.
5. Presser Foot — Holds fabric against feed teeth which draw
fabric under the presser foot as you sew.
6. Feed Teeth — Feeds the fabric under the presser foot when
sewing.
7. Presser Foot Ankle — Holds the presser foot.
8. Presser Foot Holder Screw — Loosen the screw to
remove the presser foot holder.
1. Bobbin winding tension disc
2. Thread guides
3. Handle
4. Main spool pin
5. Bobbin winder
6. Hole for auxiliary spool pin
7. Bobbin winder lever
8. Thread tension discs
9. Thread take-up lever
1. Built-in USB port
2. ON/OFF switch
3. Socket for power cord
4. Socket for foot control