Singer SE9150 - Wifi & Mysewnet Services; Only for Models SE9180 and SE9185; Wifi Introduction; Getting Started with Wifi

WIFI & MYSEWNET SERVICES
Only for models SE9180 and SE9185
mySewnet Information
Wi & Mysewnet Services – 29
Getting Started With WiFi
WiFi Introduction
Other Network
Touch the mySewnet button in the top bar, and then the settings
button in the top corner or bottom corner of the screen. Select
from the list of available networks. If your network is password
protected, you will be prompted to enter the password to con-
nect. Touch the information icon to open an information pop-up
about the network. You can also see the signal strength and
if the network is password protected, indicated with a closed
padlock.
Your machine features WiFi which makes it possible to connect
your machine wirelessly to the mySewnet services. Follow the
steps below to connect your machine.
Touch the button to connect to another network. A pop-up will
be shown on the screen where you can enter the name of the
other network.
Firmware Update Using WiFi
To be able to get the latest rmware wirelessly you need to
connect to a network using WiFi. When connected, your ma-
chine will automatically search for available rmware update.
If the machine has detected that there is a newer rmware
available, the rmware update button will be visible in the
mySewnet settings. Touch the button to download and install
the latest rmware.
Restart the machine when the update is completed. Check the
rmware version number in the mySewnet settings.