• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a
similarly qualied person, in order to avoid a hazard.
• If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualied person, in order to avoid a hazard.
• The noise level under normal operating conditions is less than 76dB(A).
• The machine must only be used with foot control of type 33911.00025 manufactured by Shang Gong Group
Co., Ltd. Jiangsu Household Sewing Machine Branch (China).
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
