Y070.301/EN Page 45
Operation instructions
SIPOS SEVEN ECOTRON
8
Spare parts
8 Spare parts
8 Spare parts
8�1 General information
With the exception of standardized, generally available components, only original spare parts may
be used. Spare parts are usually supplied as complete sub-assemblies (see list below). In the
following representation drawings, designations with 3 digits are listed. These numbers are prexed
with "2SY7" to give the full spare parts designation.
When ordering spare parts, always provide the following information:
1. Order number and serial number of the actuator (refer to name plate),
2. Spare parts designation 2SY7 . . . (refer to following list),
3. Quantity required.
■
All external metallic housing parts are made of a corrosion resistant aluminum alloy, painted
with color similar to RAL 7037 (silver-gray) as standard and meet the requirements up to
corrosivity category C5.
■
Other nish paint color ► add. version Y35
■
Very high corrosion protection
corrosivity category C5 with long protection duration ► add. version L38
8�2 Spare parts list
SEVEN actuators are designed for fault-free operation within the maintenance intervals. As we
know from experience, external causes may damage the actuator already during commissioning
stage. For such events, the recommended spare parts are listed in the following table. If you require
other parts, please contact the Service department.
No� Designation
2SY7001 Electronics unit (010 – 042)
2SY7041 Cover for electronic housing
2SY7218 Sealing kit (without illustration)
2SY7219 Non-intrusive position encoder (niP)
2SY7220 Signaling gear
2SY7225 Signaling gear cover
2SY7250 Manual drive
2SY7252 Handle
▲▲▲ = The last three digits indicate the part numbers in the exploded views.
To Next Page
Loading...
Need help?
General
