Y070.301/EN Page 55
EU Declaration of conformity/Declaration of incorporation
in accordance with Machinery Directive
for electric actuators of the following type designations:
2SA5…, 2SB5…, 2SC5…, 2SG5…
2SA7..., 2SG7…, 2SQ7...
in versions:
ECOTRON
PROFITRON
HiMod
SIPOS Aktorik GmbH as manufacturer declares herewith that the above mentioned actuators meet the basic
requirements of the following Directives:
2014/30/EU (EMC Directive)
2006/42/EC (Machinery Directive)
The following harmonized standards in terms of the specied directives have been applied:
Directive 2014/30/EU
EN 61800-3: 2004 /A1: 2012
Directive 2006/42/EC
EN ISO 12100:2010
EN ISO 5210:1996
EN ISO 5211:2001
DIN 3358:1982
SIPOS actuators are designed for the operation of industrial valves. Putting into service is prohibited until the
nal machinery has been declared in conformity with the provisions of Directive 2006/42/EC.
The following basic requirements in compliance with Annex I of the Directive are respected:
Annex I, articles 1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.6, 1.3.1, 1.3.7, 1.5.1, 1.6.3, 1.7.1, 1.7.3, 1.7.4
The manufacturer shall be obligated to electronically submit the documents for the partly completed ma-
chinery to national authorities on request. The relevant technical documentation pertaining to the machinery
described in Annex VII, part B has been prepared.
Authorized person for documentation: Dr. Thomas Suckut, Im Erlet 2, 90518 Altdorf, Germany
Furthermore, the essential health and safety requirements in compliance with Directive 2014/35/EU (Low
Voltage Directive) are fullled by applying the following harmonized standards, as far as applicable for the
products:
EN 60204-1:2006 / A1:2009 / AC:2010
EN 60034-1:2010 / AC:2010
EN 50178:1997
Altdorf, 2017-07-18
Dr. Thomas Suckut
Managing Director
This declaration does not contain any guarantees. The safety instructions in product documentation supplied with the devices
must be observed. This declaration shall lose its validity in the event of unauthorized modication of the equipment.
Certicates are valid as from the indicated date of issue. Subject to changes without notice! The
latest versions are available for download at http://www.sipos.de.