SIPOS Seven Aktorik Ecotron Series User Manual

Y070.301/EN Page 5
Operation instructions
SIPOS SEVEN ECOTRON
1
General information
1 General information
1�4�2 Scope
For the sake of clarity, not all details of all versions of the product are described in these operation
instructions, nor can they cover all conceivable cases regarding installation, operation and mainte-
nance. For this reason, the operation instructions only contain instructions for qualied personnel
(refer to section 1.1) that are necessary when the equipment is used for the purpose for which it is
intended or in industrial applications.
If the devices are used in non-industrial applications with increased safety requirements, they have
to be ensured by additional safety measures during assembly.
In case of any questions, and especially where detailed product information is not available, contact
the SEVEN sales representative in charge. Always state the type designation and the works num-
ber of the respective actuator (see name plate).
It is recommended that the services and support of the factory service are utilized for all planning,
installation, commissioning and service tasks.
The contents of these operation instructions and product documentation shall not become part of or
modify any prior or existing agreement, commitment or legal relationship. The Purchase Agreement
contains the complete and exclusive regulation on material defect liability of SIPOS Aktorik. These
contractual regulations are neither amended nor limited by the descriptions contained in these oper-
ation instructions and documentation.
1�5 Supplementary operation instructions
2SG7 small part-turn actuator
2SQ7 small part-turn actuator
COM-SIPOS PC parameterization software
PROFIBUS operation instructions
MODBUS operation instructions
Enclosure protection IP68-8 m “K51“
Increased vibration resistance “K57“, “K58“
Increased vibration resistance according to seismic class S2A “K59“
Very high corrosion protection
corrosivity category C5 with long protection duration “L38
SIPOS SEVEN actuator with USP
Binary and analog inputs freely available via bus
and other
Any special installation and operation instructions furnished by the suppliers of subcontracted com-
ponents, attachments or xtures are attached to the set of instructions and have to be observed.

SIPOS Seven Aktorik Ecotron Series Specifications

General

Brand	SIPOS
Model	Seven Aktorik Ecotron Series
Category	Controller
Language	English