61 23 488 D 3474
10 D 3474.208.01.06.02 04.2010
Starting GALAXIS Sirona Dental Systems GmbH
Operator's Manual GALAXIS
3 Starting GALAXIS
Explanation GALAXIS is started via SIDEXIS XG.
Prerequisites In order to start GALAXIS, a 3D X-ray image must be opened in the SIDEXIS
database first.
Simplified invocation 1. Start SIDEXIS XG.
ª The GALAXIS button is displayed as not active (faded) on the toolbar
of the SIDEXIS XG desktop.
2. Select a patient with an existing 3D X-ray image.
3. Select a 3D X-ray image.
ª The selected 3D X-ray image is displayed in SIDEXIS. The GALAXIS
button is displayed as active.
4. Press the GALAXIS button.
ª GALAXIS and the selected 3D X-ray image are loaded.
Alternative start options The following alternative options exist for starting GALAXIS via the the SIDE-
XIS XG desktop instead of by pressing the GALAXIS button:
● Via context menu: Select the
"3D"
menu option.
●Via the
"3D"
button in the upper right-hand corner of the 3D image.
NOTICE
If no 3D X-ray images are available, you must create a 3D X-ray image first
(see the chapter entitled "Creating a 3D image").
To Next Page
Loading...
