63 22 726 D3561
D3561.201.01.03.02 05.2012
157
Sirona Dental Systems GmbH 4 Operation
Operating Instructions SINIUS / SINIUS CS 4.13 Configuration of the treatment center (setup)
båÖäáëÜ
4.13
Configuration of the treatment center (setup)
Configuration of the treatment cent er (setup)
Various treatment center functions can be individually configured via the
Setup settings. The treatment center can therefore be adapted to match
each user's personal method of treatment.
4.13.1 Opening the setup programs
Opening the setup programs
✔ All instruments are in place.
✔ The required user profile is active.
➢ Press and hold the
Setup
fixed key (> 2 s).
Six setup programs are offered for selection.
The current software version of the treatment center is displayed on the
left side of the touchscreen.
Key symbols of the six setup programs line by line from left to right:
● EasyTouch user interface
● Date and time
● Control options
● Instruments
● Network connection
● Service domain (for service engineers only)
➢ Touch the corresponding key to open the setup programs.
Scroll forward
Some of the setup programs comprise several pages. Using the
Scroll
forward
key, you can switch to the next Setup program page.
Setup program, storing settings
Missing function keys
IMPORTANT
Setup program, storing settings
The setup program closes automatically if no key is activated in 25
seconds. All of the settings you have made will be accepted when you
leave the setup program.
IMPORTANT
Missing function keys
Function keys for functions which the treatment center equipment does
not include are not displayed on the touchscreen.
To Next Page
Loading...
