63 22 726 D3561
D3561.201.01.03.02 05.2012
87
Sirona Dental Systems GmbH 4 Operation
Operating Instructions SINIUS / SINIUS CS 4.5 Dentist element
båÖäáëÜ
4.5.8 General instrument functions
General instrument functions
Instruments placed in a ho rizontal position
Settings pertaining to the coolant, instrument light and foot control can be
made in the sub-screen of the removed instrument.
The sub-screens vary according to the instrument currently removed.
Functions not available for the relevant instrument are not displayed in
the sub-screen.
4.5.8.1
Selecting a coolant
Selecting a coolant
Air, spray or NaCl can be preselected as the instrument coolant in the
sub-screen. The preselected coolant can then be switched on or off in the
Instrument program.
Instruments placed in a ho rizontal position
✔ The
Sub-screen
of the removed instrument is displayed on the
touchscreen.
➢ Select the coolant required for the removed instrument. Touch the
Spray
,
Air
or
NaCl
key.
The key of the preselected coolant is highlighted orange. The key
of the preselected coolant is displayed in the
Instrument program
or in the
Start program with instrument functions
.
4.5.8.2
Switching the preselected coolant on/off
Switching the preselected coolant o n/off
Instruments placed in a ho rizontal position, Start program with inst rument functions
Via touchscreen
The preselected coolant can only be switched on/off via the foot control
keys in the
Start program with instrument functions
operating mode, see
below.
✔ An instrument is removed and the touchscreen displays the
Instrument program
.
➢ Touch the key of the preselected coolant (
Spray
,
Air
or
NaCl
).
If the key of the preselected coolant is highlighted orange, it will
be switched on together with the instrument when the foot pedal
is actuated. If the key is highlighted gray, the coolant is switched
off.
Via foot control
✔ An instrument is removed.
➢ Press the left button of the foot control.
If the key of the preselected coolant (
Spray
,
Air
or
NaCl
) is
highlighted orange on the touchscreen, it will be switched on
together with the instrument when the foot pedal is actuated.
CAUTION
Instrument can be operated without coolant.
Tooth substance can be damaged by frictional heat.
➢ Always make sure that the treatment area does not overheat
whenever you switch the coolant off.