Sirona Sinius CS - Touchscreen

63 22 726 D3561
36 D3561.201.01.03.02 05.2012
3 Unit description Sirona Dental Systems GmbH
3.7 Dentist element Operating Instructions SINIUS / SINIUS CS
3.7.3 Touchscreen
Touchscreen
The touchscreen displays virtual function keys according to the program
selected. A list of all function keys is provided in the Appendix of this
document, see "Overview of all function keys" [ → 225].
Some programs are divided into a main program and sub-screens. The
main programs are briefly introduced below:
Start program The Start program can be displayed in the
Start program without
instrument functions
or Start program with instrument functions operating
mode. For details on both operating modes, see “Instrument functions in
Start program" [ → 49].
Start program without instrument functions (left) and with instrument functions
(right)
Instrument program The Start program without instrument functions mode displays the
instrument program for the removed instrument. The Instrument
programs can be displayed either with the quick setting keys or via the
function levels. For details, see "Quick setting keys and function levels".
Motor screen with quick setting keys (left) and function levels (right)
SIVISION program The SIVISION program allows for controlling certain computer programs
running on the external PC directly from the treatment center. For details,
see "External / internal PC" [ → 152].
SIVISION program