Sirona Sinius CS - Page 38

63 22 726 D3561
38 D3561.201.01.03.02 05.2012
3 Unit description Sirona Dental Systems GmbH
3.7 Dentist element Operating Instructions SINIUS / SINIUS CS
Flushing
Starts or stops the flushing of the cuspidor bowl.
When the
Flushing key is pressed (> 2 s), the Flushing Time settings
screen appears.
Freely selectable function
e.g. call key
Freely available relay 230 VAC, 6 A
(connected by the service engineer).
This function can be preset as a button or as a switch in the Setup
program.
Freely selectable function
Freely available relay 230 VAC, 6 A
(connected by the service engineer).
This function can be preset as a button or as a switch in the Setup
program.
Clean key
Pressing this key deactivates the complete user interface of the dentist
element. Pressing it again > 2 s reactivates the control panel.
This is used to make sure that no unwanted functions can be accidentally
triggered while cleaning the surface.
Setup key
Used for individual configuration of the treatment center by the user and
for reading out messages by the service engineer, see "Configuration of
the treatment center (Setup)" [ → 157].