Sirona Sinius CS - Changing Programs

63 22 726 D3561
D3561.201.01.03.02 05.2012
59
Sirona Dental Systems GmbH 4 Operation
Operating Instructions SINIUS / SINIUS CS 4.3 Foot control
båÖäáëÜ
Changing programs
✔ Cursor control with program change is switched on.
1. Position the cursor at the starting point of the cursor path.
2. Move the cursor past the start position. Hold the 4-way foot control
plate in the upward position.
 The touchscreen display changes to the start or Instrument
program.
S
0