Introduction to Components
3-1
Chapter 3
Introduction to Components
3.1 System Configuration
3.1.1 Basic Configuration
a) Main Unit (including battery): 1pc
b) Probe: Multiple frequency convex probe: 1 pc.
3.1.2 Accessories
a) Power adapter;
b) Battery charger;
c) BNC/RCA cable;
d) Printer control cable;
e) Special charger power cable (for connection with car cigarette lighter);
Note: The specific accessories are subject to the Packing List.
3.1.3 Option
3.1.3.1 Probe
a) Linear probes;
b) Convex probes;
c) Micro-convex probes.
3.1.3.2 Storage, Print and Record Devices:
a) USB connection devices;
b) Printer.
3.1.3.3 DICOM3.0 port and software
3.1.3.4 Uninterrupted Power Supply (UPS)
In some areas, there may be sudden power cut due to power supply shortage, causing
system abrupt power-off, disorder or loss of data, and thus affect system stability. To
avoid such situation, it is recommended to connect a UPS device, with its power
consumption at 500 VA or above, to the system.
To Next Page
Loading...